Tabletop Installation Instructions
1) Flip your tabletop on its top side. Be sure to use a soft surface to protect your tabletop.
2) Flip your base on top of the bottom of the tabletop. You can mount your table base wherever you like, just be sure to stay at least two inches from the edge.
3) Using a wood screw that goes into the tabletop no more than ¾”, screw directly into the holes provided on your mounting plate. DO NOT PREDRILL!
4) Repeat step 3 until all holes in every mounting plate are used.
5) Installation is complete.
Download PDF
Pedestal Base Installation Instructions
1) Un-screw the bolts on both sides of the column.
2) Line up the tabletop mounting plate with the side of the column that has the equal amount of holes. Insert bolts and tighten as firmly as possible.
3) Line up the base plate, or foot, with the side of your column that has the equal amount of holes. Insert bolts and tighten as firmly as possible.
4) Your base assembly is complete.
Download PDF
CA18 Assembly Instructions
1) Remove all items from packaging.
2) While standing all part "A" pieces upright, joining them together as shown in the image below (this will be easiest with a second person), slide the two part "B" pieces over each formed end.
3) You will find that parts "C" are located inside of part "B".
4) Tighten parts "C" with the allen key that was provided. Although it is not required, you may also use a thread adhesive for added logevity of connection.
5) Table base assembly is complete.
Download PDF
CA28-34D Assembly Instructions
1) Remove all items from packaging.
2) Attach one part "B" to one part "A", using one part "D+F+E" with the allen key provided.
3) Attach the remaining part "B" to the same part "A", using one part "D+F+E" in the same manner.
4) Repeat this process for all part "A" pieces.
5) Fully tighten all bolts after all bolts have been installed.
6) Table base assembly is complete.
Download PDF